Spray Nozzles
-
1-1/2" Large Frothy Stainless Steel NozzleLike columns of liquid sentries standing watch, welcoming visitors and passersby, the Chrome Frothy produces a pillar of dense, full, foaming, icicle-like fountain effects that pulsate proudly as if ready to burst with reserves of immense power. Not water level dependent. Video - Chrome...
- $461.99
-
- $461.99
- Unit price
- per
-
Water Fans 1/2"-3/4"Water Fans 1/2"-3/4" Brass Nozzle - Spec Sheet Water Fans 1/2"-3/4" Brass Nozzle - High Res Renders Water Fans 1/2"-3/4" Brass Nozzle - 3D Model with Textures A clear, fan-shaped sheet of water. Fan Jet works best at lower heights. Ideal when angled to...
- $46.99
-
- $46.99
- Unit price
- per
-
TrumpetsTrumpet Brass Nozzle- Spec Sheet Trumpet Brass Nozzle - High Res Renders Trumpet Brass Nozzle- 3D Model with Textures With its wide, misty, transparent quality, our Trumpet nozzle sets the stage for a pleasant, pastoral, peaceful water show. Similar to our other trumpets, this...
- From $65.99
-
- From $65.99
- Unit price
- per
-
Terminal BoxTerminal Box Nozzle - Spec Sheet Terminal Box Nozzle - High Res Renders Terminal Box Nozzle - 3D Model with Textures Electrical Terminal Box Used for 12 volt underwater lighting applications 4 Electrical Ports
- From $15.99
-
- From $15.99
- Unit price
- per
-
Submersible Foam Jet 1-1/2"Submersible Foam Jet Brass - Spec Sheet Submersible Foam Jet Brass - High Res Renders Submersible Foam Jet Brass - 3D Model with Textures The Foam Jet creates a mass of aerated water run at lower heights, and becomes a splashy, frothy column at...
- $130.99
-
- $130.99
- Unit price
- per
-
Lotus 1-1/2"The Lotus nozzle is a tri-tier, multiple clear stream jet type. From decorative indoor applications to large, powerful outdoor use, the lotus nozzle provides the most elaborate display from a single nozzle available. The Lotus nozzle is typically used alone, with colored or white...
- $153.99
-
- $153.99
- Unit price
- per
-
Geyser 1-1/2"Geyser Brass Nozzle- Spec Sheet Geyser Brass Nozzle - High Res Renders Geyser Brass Nozzle- 3D Model with Textures Geyser nozzles are widely used in architectural fountains due to their high visibility and good wind resistance. Moderately hard in both appearance and audible impact,...
- $153.99
-
- $153.99
- Unit price
- per
-
Frothy 1-1/2"Frothy 1-1/2" Brass Nozzle - Spec Sheet Frothy 1-1/2" Brass Nozzle - High Res Renders Frothy 1-1/2" Brass Nozzle - 3D Model with Textures Like liquid lava or an undulating glacier, the Frothy nozzle is the center of attention in any water feature, whether...
- $192.99
-
- $192.99
- Unit price
- per
-
External Foam Jet 1"Like columns of liquid sentries standing watch, welcoming visitors and passersby, the External Foam Jet produces a pillar of dense, full, foaming, icicle-like fountain effects that pulsate proudly as if ready to burst with reserves of immense power. Made of Brass. Not water level...
- $269.99
-
- $269.99
- Unit price
- per
-
Drain 1-1/2"Grated Brass Drain For overflow or Bottom discharge Made from Brass 1 1/2" Female thread
- $153.99
-
- $153.99
- Unit price
- per
-
CometComet Brass Nozzle - Spec Sheet Comet Brass Nozzle - High Res Renders Comet Brass Nozzle - 3D Model with Textures Use in multiples to create spray rings. These nozzles are adjustable. Each nozzle creates a smooth, continuous stream of water. These nozzles are...
- From $38.99
-
- From $38.99
- Unit price
- per
-
5 Tier5-Tier Brass Nozzle- Spec Sheet 5-Tier Brass Nozzle - High Res Renders 5-Tier Brass Nozzle- 3D Model with Textures The 5 Tier Nozzle develops the unique massive clustering arching water pattern. The multi-channeled nozzle produces individual water trajectories that exhibits excellent light reflecting properties,...
- $92.99
-
- $92.99
- Unit price
- per
-
Water Fans 1-1/2"Finger Water Fans 1-1/2" Brass Nozzle - Spec Sheet Finger Water Fans 1-1/2" Brass Nozzle - High Res Renders Finger Water Fans 1-1/2" Brass Nozzle - 3D Model with Textures Description A finger-like fan spray ideal as a peripheral adornment to vertical central displays...
- From $130.99
-
- From $130.99
- Unit price
- per
-
PirouettesPirouettes Brass Nozzle - Spec Sheet Pirouettes Brass Nozzle - High Res Renders Pirouettes Brass Nozzle - 3D Model with Textures Description Like an expensive, ornate chandelier or royal crown studded with precious gems, the Pirouette nozzle's rotating, multi-stream clear jet display is an...
- From $307.99
-
- From $307.99
- Unit price
- per
-
3 Tier Adjustable Nozzles3 Tier Adjustable Brass Nozzle- Spec Sheet 3 Tier Adjustable Brass Nozzle - High Res Renders 3 Tier Adjustable Brass Nozzle- 3D Model with Textures Description A galactic explosion in progress. The birth of a distant star or supernova. Whatever its pretty, subtly powerful...
- From $307.99
-
- From $307.99
- Unit price
- per
-
3 Tier Nozzles3 Tier Nozzles - Spec Sheet 3 Tier Nozzles - High Res Renders 3 Tier Nozzles - 3D Model with Textures Description 3 Tier Nozzle develops the unique massive triple tier arching water pattern. The multi-channeled nozzle produces individual water trajectories that exhibits excellent...
- $130.99
-
- $130.99
- Unit price
- per
-
Metal CouplingsCouplings Nozzle - Spec Sheet Couplings Nozzle - High Res Renders Couplings Nozzle - 3D Model with Textures Couplings Used primarily for nozzles and Extension Poles. Female to Female NPT Thread on all Couplings.
- From $23.99
-
- From $23.99
- Unit price
- per
-
Extension PolesExtension Poles Nozzle - Spec Sheet Extension Poles Nozzle - High Res Renders Extension Poles Nozzle - 3D Model with Textures Description Extension poles used primarily for spray nozzles. Male to Male NPT Thread on all poles Couplings are available to create longer poles...
- From $130.99
-
- From $130.99
- Unit price
- per
-
HemispheresHemisphere Nozzle - Spec Sheet Hemisphere Nozzle - High Res Renders Hemisphere Nozzle - 3D Model with Textures Desctiption A pulsating Hemi-sphere of water bells of water that rises above the water level on a stand up to 48 high. When not in use...
- From $730.99
-
- From $730.99
- Unit price
- per
-
DandelionsDandelions Nozzle - Spec Sheet Dandelions Nozzle - High Res Renders Dandelions Nozzle - 3D Model with Textures Description A pulsating sphere of water bells of water that rises above the water level on a stand up to 48 high. When not in use...
- From $1,499.99
-
- From $1,499.99
- Unit price
- per
